The GPS RADIONOVA RF antenna module integrates a low-power receiver IC with Antenova's single-ended internally balanced antenna technology. “Antenova's balanced antenna technology enables GPS RF ...

A radio frequency (RF) front end module refers to a device panel that combines all circuits between the antenna and the receiver. It consists of an RF filter, amplifier, local oscillator, mixer ...

GPS Source RF signal splitters typically operate in conjunction with an active GPS antenna; consequently, a GPS RF signal splitter must have provisions for managing the DC voltage to the active GPS ...

GF22FDSOIV08_GNSS_01 is a GNSS RF receiver which is designed to support GPS L1, Beidou B1, Galileo E1 and Glonass G1 modes. Moreover, L2, L5, B2 and B3 bands are separately supported by specific ...

Latest releases of OpenTX Update the OpenTX firmware elrs lua Script ExpressLRS project ExpressLRS configurator 2.4 Ghz rf ...

This article discusses the GALANT adaptively steered antenna array and receiver, demonstrating the test scenarios generated with the GNSS simulator. Exemplary results of different static and dynamic ...

NT1021 is a single-chip dual-channel RF front-end consuming a very low power (47 mW typical at 2.1 V) and performing a simultaneous reception of both GPS/Galileo/BeiDou and GLONASS signals. ... This ...

Global engineering services company, Cloud2GND, in partnership with wireless technology specialists, Ezurio (formerly Laird Connectivity), has released a module designed to simplify development of ...

After making a small board for his transmitter, [Camilo] had a very small remote control, able to send button presses or other data to a remote receiver.

Next is the radio (RF receiver) module. The 433-MHz RF receiver used here looks very similar to the common “RX480” Chinese module (the part number of its RF transmitter module is WL102).